Back

Wi-Fi

This control sends company Wi-Fi settings to managed devices. Use it so employees join the office network automatically, without typing the password themselves.


 

Feature/Functionality

Overview

macOS Windows Linux iOS / iPadOS Android
✅ ✅ ✅ ✅ ✅

Factorial IT delivers the network as a managed Wi-Fi profile through MDM. When the network is in range, the device connects on its own. The employee does not need to know the password.

 

How to use

  1. Go to MDM > Controls > Add new control and choose Wi-Fi.
  2. Fill in the network details:
    • Network name: the network's SSID.
    • Encryption type: the security type, for example WPA2.
    • Network password: the password for that network.
  3. Choose where the control applies: all devices, specific device groups, or a custom target.

 

Change or switch off the control

Open the control from MDM > Controls to edit or disable it. Disabling stops enforcement. It does not remove settings already applied on devices.

 

Tips and Best Practices

  • Copy the SSID exactly. The network name has to match the one the access point broadcasts.
  • Pick the encryption type your network actually uses. If it does not match, the device will not join.
  • Use device groups to limit the network to the right people. Target only the devices that should join it.
  • Remember that disabling does not remove the profile. Devices keep the network after you switch the control off.

 

Troubleshooting and FAQ

Troubleshooting

  • A device does not join the network. Check that the device is in range and that the Network name, Encryption type and Network password match the network.
  • A device still has the network after the control was disabled. This is expected. Disabling stops enforcement but leaves existing settings on the device.

 

FAQ

  1. Do employees need to enter the Wi-Fi password?
    No. The device connects automatically when the network is in range.
     
  2. Which platforms are supported?
    macOS, Windows, Linux, iOS / iPadOS and Android.
     
  3. Can I target only some devices?
    Yes. Apply the control to all devices, specific device groups or a custom target.

Was this article helpful?

Give feedback about this article

Can’t find what you’re looking for?

Our customer care team is here for you.

Contact us

Knowledge Base Software powered by Helpjuice